http://wiki.engexp.com en-us http://wiki.engexp.com ActiveKB NX office@engexp.com Fri, 10 Sep 2010 02:47:12 EDT 20 http://wiki.engexp.com/questions.php?questionid=18 ASCE 7 Contents 1 NOTICE: ERRATA SHEET POSTED 2 Key Changes in ASCE 7-05 2.1 Chapter 6: Wind Loads 2.1.1 Parapets 2.1.2 Design Wind Loads on Open Structures 3 ASCE 7 Def ... Frank Bennardo Wed, 22 Jul 2009 19:55:09 GMT http://wiki.engexp.com/questions.php?questionid=25 Cable Railing Design Contents 1 Horizontally Run Cable Railing System 1.1 Cable Railing Components 1.2 Sequence of Installation PLEASE NOTE: The text below has been adapted ... Frank Bennardo Wed, 22 Jul 2009 15:22:45 GMT http://wiki.engexp.com/questions.php?questionid=169 Wind Induced Vibrations on Light Standards Copyright Pete Manis, P.E., and Wes Jones, P.E.From http://www.structuremag.org/article.aspx?articleID=562 The authors were recently in ... Frank Bennardo Mon, 29 Jun 2009 17:18:29 GMT http://wiki.engexp.com/questions.php?questionid=108 Parapet Walls ASCE 7-05 Contents 1 C6.5.11.5 Parapets 1.1 Wind Loading 1.1.1 New Term GCpn C6.5.11.5 Parapets Prior to the 2002 edition of the standard, no provisions for t ... Frank Bennardo Wed, 22 Jul 2009 15:40:06 GMT http://wiki.engexp.com/questions.php?questionid=61 ExceltoCAD (Excel2CAD or Xcel2CAD) How to use: version:___ Install program, which is stored in \F...Run in AutoCAD select area in ExCel to Copy In ExceltoCAD, perform these operations: ... Frank Bennardo Wed, 19 May 2010 16:58:47 GMT http://wiki.engexp.com/questions.php?questionid=5 2007 FBC AmendmentsGeneral Amended sections of the 2007 FBC are indicated throughout the Code by markings in the margins (vertical lines or arrows), or by red-colored text in the draft ... Frank Bennardo Thu, 24 Sep 2009 18:57:01 GMT http://wiki.engexp.com/questions.php?questionid=71 Florida Building Code Contents 1 History 1.1 The Official Story 1.2 A Colloquial Account 2 2004 FBC Notable Information: 2.1 Rules Prohibiting Local Municipalities From Am ... Frank Bennardo Wed, 22 Jul 2009 16:57:32 GMT http://wiki.engexp.com/questions.php?questionid=190 A36 has a density of 0.28 lb/in³ (7.8 g/cm³). Aluminum typically has a density of 0.098 lb/in3.A36 steel in plates, bars, and shapes with a thickness of less than 8 in (200 mm) has a minimum yield ... Frank Bennardo Thu, 12 Nov 2009 15:57:44 GMT http://wiki.engexp.com/questions.php?questionid=185 Frank Bennardo Mon, 31 Aug 2009 20:27:08 GMT http://wiki.engexp.com/questions.php?questionid=148 Typical Product Approval Process Contents 1 Typical Product Approval Process 1.1 (1.) Research and Development 1.1.1 Manufacturer is responsible for all research and developm ... Frank Bennardo Wed, 22 Jul 2009 13:52:33 GMT