Loading... Please wait...

Sign Up to Receive Discount Promotions & Notices of New Store Items


EX Information Resources

Knowledgebase Home | | Favorites | Contact-Submit Article | Staff Login Knowledgebase Home | | Favorites | Contact-Submit Article | Staff Login
Search the Knowledgebase Browse by Category

[Advanced Search]
Advanced Search
* Query:
  Categories:
  Rated:
Search Results for "http://217.218.225.2:2082/index.html?"
There were 52 articles found for your query: (Page 1 of 3)     «« |  Prev | 1 | 2 | 3 | Next | »»
  1. 4x Safety Factor (Railing) 4x Safety Factor (Railing) [Article]


  2. Differences Between Safety Glazing Standards CPSC 16 CFR 1201 and ANSI Z97.1Differences Between Safety Glazing Standards CPSC 16 CFR 1201 and ANSI Z97.1 [Article]
    Differences in Scope The principal differences between the CPSC’s 16 CFR 1201 standard and the ANSI Z97.1-2004 standar

  3. Lead Abatement CertificationLead Abatement Certification [Article]
    This is important information for any contractor who participates in remodeling of existing contruction that dates 1978 or older. Certification of Lead Abatement w

  4. Sunroom InformationSunroom Information [Article]
    Sunroom Information Contents

  5. Use of non-porous system on a non-essential facilityUse of non-porous system on a non-essential facility [Article]


  6. RE_Clarification_on_NDS_2001.htmRE_Clarification_on_NDS_2001.htm [Attachment in Root Diameter]
    From: Showalter, Buddy [Buddy_Showalter@afandpa.org] on behalf of AWC I

  7. ASCE 7ASCE 7 [Article]
    ASCE 7 Contents 1 NOTICE: ERRATA SHEET POSTED 2 Key Changes in ASCE 7-05

  8. Cities by CountiesCities by Counties [Article]
    Cities by counties List of cities by counties in Florida

  9. Florida Product ApprovalFlorida Product Approval [Article]
    Florida Product Approval Contents 1 Overview 1.1 Product Evaluation an

  10. Gage to Inches ConversionGage to Inches Conversion [Article]
    Gage to Inches Conversion GAUGE(ga) OF METAL - THICKNESS (inches) 8 - 0.1644" 9 - 0.1494" 10 - 0.1345" 11 - 0.1196" 12 - 0.1046" 14

  11. HandrailsHandrails [Article]
    Handrails Contents 1 NON HVHZ 1.1 1012.1 Where required 1.2

  12. Moment Of InertiaMoment Of Inertia [Article]
    Moment Of Inertia Contents 1 Centroids & Moment of Inertia 1.1 Center

  13. Screen EnclosuresScreen Enclosures [Article]
    Screen Enclosures Contents 1 Screen Enclosures 1.1 Loading

  14. Cable Railing DesignCable Railing Design [Article]
    Cable Railing Design Contents 1 Horizontally Run Cable Railing System

  15. Steel Bolt Edge DistanceSteel Bolt Edge Distance [Article]


  16. Storm ShuttersStorm Shutters [Article]
    Storm Shutters 2004 Florida Building Code, Section... 2413.7 Storm shutters must completely cover an opening in all directions. 2413.7.1 On any side of an opening , the

  17. TapconTapcon [Article]
    Tapcon March 07 2007, we will no longer be using the name "Tapcon" for these types of masonry screws. We will still make these fasteners here in Rockford the same way, same everything, w

  18. Test RequirementsTest Requirements [Article]
    Test Requirements Contents

  19. Typical Product Approval ProcessTypical Product Approval Process [Article]
    Typical Product Approval Process Contents

  20. USA Wind VelocityUSA Wind Velocity [Article]
    USA Wind Velocity As per our head engineer, is not a good idea to supply a specific wind velocity because we are liable if we're wrong. We can supply an estimated wind velocity based on

(Page 1 of 3)     «« |  Prev | 1 | 2 | 3 | Next | »»

Powered by Engineering Express

Home ::: Services ::: Tools::: Ordering ::: About Us ::: Support ::: Login

Click Here To Contact Us  ::: Email: office@engexp.com ::: Privacy Policy  

ENGINEERING EXPRESS®
160 SW 12th Ave #106 Deerfield Beach, FL 33442
Phone: (954) 354-0660  |  Fax: (954) 354-0443 | Toll Free: 1-866-ENG-EXP1
www.engineeringexpress.com or just www.engexp.com
© 2006-2010 Frank L. Bennardo PE, Inc
A Florida Corporation
Information, methodology, logos, photos, and trademarked names
on this website may not be used, reproduced, distributed, or modified without
the written permission of Frank L. Bennardo, P.E., Inc.